Intuitive Touch Screen Operation
Qwerty keyboard example The intuitive touch screen interface provides quick and smooth operation. The large 5.5 inch display (320×128 pixels) responds naturally to the touch allowing you to change settings, enter frequencies, edit memory channels with ease.
Vehicle installation example
(Using optional MBF-1 mount base and MBA-2 controller bracket)
The ID-5100E can receive both FM/FM and FM/DV mode signals simultaneously. Two DV mode signals can be monitored for receive on either channel. You can check other repeaters or other channel activities while waiting for the main repeater.
* Main band audio has priority, if two DV signals come in at the same time.
DV/DV dualwatch (DR function) example
FM/DV dualwatch (DR function) example
FM/DV dualwatch example
Integrated GPS Receiver
Received position information example The ID-5100E has an integrated GPS receiver in the controller and shows own position, course, speed and altitude on the display. The GPS position information can be used for exchanging position reports, tracing the GPS log and searching for nearby repeater sites.
DV/FM Repeater List Function
The DV/FM repeater list function assists you in accessing nearby repeaters, even when you are visiting an area for the first time. The function searches for a nearby repeater using the repeater memories and GPS position information.
|*||To use the automatic repeater list function, the position data of the repeater is required. The ID-5100E will be shipped with a limited number of repeater memories preprogrammed.|
Dplus Reflector Linking
Reflector commands example Dplus reflector link commands are added to the DR function to allow easy reflector operation. Use Reflector, link/unlink to Reflector, echo test and repeater information commands are selectable.
SD Card Slot for Voice and Data Storage
When used with an SD card, the SD card can store various contents including voice memory, DV auto reply message, TX voice message, QSO log, RX history log and GPS log data. Memory channels, repeater memories and other personal settings can be saved to the SD card and can be loaded to the transceiver.
VS-3 Bluetooth® Headset
The optional Bluetooth® headset, VS-3 provides hands-free communication and can remotely control the ID-5100E with three programmable buttons.
* Optional UT-133/A Bluetooth® unit must be installed in the ID-5100E.
Bluetooth® application image
Bluetooth® headset, VS-3 (option)
Bluetooth® unit, UT-133/A (option)
RS-MS1A Android™ Application
(Free download application from Google Play™)
©2014 Google - Map data
Repeater map example
DR function setting example The RS-MS1A allows you wirelessly connect the ID-5100E and remotely set DR functions, link with a map application and send/receive messages over the DV mode. In addition, pictures taken by the Android™ device can be transmitted in the DV Fast Data mode or DV mode.
DV Fast Data Mode*
By using data in place of voice frames, the ID-5100E can transfer data 3.5 times faster (3480 bps) than in the conventional DV mode (with voice).
* The DV Fast Data mode is not compatible with the DV mode low-speed data communication.
Optional Active Noise Canceling Microphone
The optional active noise canceling microphone HM-209 can automatically reduce noise in extremely noisy environments and assist in transmitting clear and accurate audio.
Watch the HM-209 performance video:
- Enhanced D-PRS functions with object, position, items and weather formats
- Convenient memory contents management using CSV format
- Speech function announces operating frequency, mode and received callsign (DV mode)
- Independent main dial, volume and SQL knobs for A/B bands
- AM airband dualwatch
- CS-5100, programming software supplied
- 50W output power on both VHF and UHF bands
- 1500 (50 groups) Repeater list entries
- 300 call sign memories
- 300 GPS memories
- Split tone functions in the analog mode
Supplied accessories (* May differ, depending on version)
- Hand microphone, HM-207
- DC power cable, OPC-1132
- Controller cable, OPC-837 (3.5 m; 11.4 ft)
- Microphone hanger
- CD (CS-5100 and instruction handbook PDF)
- Spare fuse
Main unit panel view
HM-207Same as supplied.
|Noise canceling microphone.|
MBF-1Suction cup mounting base. MBA-2 is required.
MBF-4For mounting the main unit.
MIC ADAPTER CABLE
OPC-589For use with an 8-pin microphone
CONTROLLER EXTENSION CABLE
OPC-11563.5m (11.4ft) cable. A modular connector is supplied.
OPC-2350LUUSB cable for connection with an Android™ device or a PC.
CS-5100Same as supplied.
SP-352m (6.5ft) cable
SP-35L6m (19.6ft) cable
SP-304 inch (102.5mm) diameter speaker
CI-V LEVEL CONVERTER
Bluetooth® UNIT & Bluetooth® HEADSET
VS-3Use with UT-133/A in a pair
RS-MS1AFree download software. Download from Google Play™