The LDG Z-11ProII is a small, low-cost automatic tuner suitable for any amateur purpose, whether base, mobile or portable. It handles up to 125 watts SSB or CW but requires only 0.1 watts to tune, making it ideal for QRP operation.
Like all LDG tuners the Z-11ProII operates automatically, beginning a tuning cycle whenever the SWR exceeds a preset limit. It also features LDG’s advanced memory tuning, providing 2,000 memory locations; when tuning near a previously used frequency it will recall the settings for nearly instant tuning. It learns your favorite frequencies and bands as you use it. You can also start a tuning cycle manually whenever necessary.
The LDG Z-11ProII has features found in larger, higher price LDG tuners, such as dedicated buttons for manually fine-tuning the match. This is not often needed, but can be useful when tuning an antenna far from resonance.
The LDG Z-11ProII requires very little electrical power; when not tuning the current draw is negligible. The user can optionally add an internal battery holder for six AA batteries or two 9 volt batteries; these will operate the tuner for a year of normal use. This feature makes the Z-11Pro especially suitable for mobile or portable operation.
•0.1 to 125 watt power range (SSB and CW, 30W on PSK), 100W on 6M.
•Easy to read LED display for SWR and status.
•2000 memories for instantaneous band changing.
•Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune.
•Selectable user parameters: Auto/Semi, threshold, and more.
•1.8 to 54.0 MHz coverage. Built-in frequency sensor.
•Tunes 6 to 1000 ohm loads (16 to 150 on 6M).
•For Dipoles, Verticals, Vs, Beams or and Coax Fed Antenna.
•Optional external Balun allows tuning of random length, long wire or ladder line fed antennas.
•Includes 6' DC power cable.
•Power requirements: 6 to 16 volts DC at 300 mA Max. 25 uA standby current.
•User installable 4-AA battery holder (not supplied).