Print this page
Mandag, 07 November 2016 10:53

LDG RT/RC-100

Vurder denne
(0 stemmer)

The LDG RT-100 is an automatic tuner intended for outdoor mounting at or near the antenna feedpoint, minimizing SWR losses in the transmission line. It handles up to 125 watts on SSB and CW. The RT-100 is weatherproof, and is powered over the coaxial cable via the included RC-100 remote controller/Bias-T.
The RT-100 will automatically tune when the SWR exceeds a preset limit. You can also manually begin a tuning cycle or bypass the tuner from the RT-100 remote. DC power for the tuner is applied to the RT-100 near the operating position and transferred to the tuner over the coax.
Like all LDG tuners the RT-100 operates automatically, beginning a tuning cycle whenever the SWR exceeds a preset limit. It also features LDG’s advanced memory tuning, providing 2,000 memory locations; when tuning near a previously used frequency it will recall the settings for nearly instant tuning. It learns your favorite frequencies and bands as you use it. You can also start a tuning cycle manually whenever necessary.
RT100 front pic

RC100 CONTROLLER FRONT PIC

Specifications

  • 0.1 to 125 watt power range (SSB and CW), 30 watt digital.
  • 2000 memories for instantaneous band changing.
  • Powered over the coax. Weather resistant ABS Enclosure with Gaskets. -40 to +70C.
  • Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune.
  • 1.8 to 54.0 MHz coverage. Built-in frequency sensor.
  • Tunes 4 to 800 ohm loads (16 to 150 on 6M), 16 to 3200 ohms with optional 4:1 Balun.
  • For Dipoles, Verticals, Vs, Beams or any Coax Fed Antenna.
  • Includes U-bolt for pipe mounting.
  • Includes RC-100 Controller providing power and control to tuner.
  • Optional external Balun allows tuning of random length, long wire or ladder line fed antennas.
  • Small Size: 6.5L” x 6.0W” x 2.5H”.
  • Weight: 1 pounds

 

Link til manual.

Lest 580 ganger Sist redigert Mandag, 07 November 2016 11:05