Print this page
Mandag, 07 November 2016 10:04

LDG YT-100

Vurder denne
(0 stemmer)

The LDG YT-100 is an automatic tuner intended for use with modern Kenwood transceivers. It works with popular Yaesu transceivers including the FT857, FT897 and FT-100 (including all D models). The interface cable is included.
The YT-100 connects to the radio via its Tuner port to control the tuning cycle; the transceiver’s Tune button controls the tuner. The radio’s Tuner port also powers the tuner, so it requires no external power supply. The YT-100 handles up to 125 watts SSB or CW (100 watts on 6 meters).
The YT-100 integrates with you Kenwood transceiver for seamless operation. Since the YT-100 is matched to your specific rig, you just press the Tune button on the radio, and the rig and tuner do the rest: reduces power, transmits a carrier, automatically matches the antenna to the rig, then restores the original power and mode.
Like all LDG tuners the YT-100 operates automatically, beginning a tuning cycle whenever the SWR exceeds a preset limit. It also features LDG’s advanced memory tuning, providing 2,000 memory locations; when tuning near a previously used frequency it will recall the settings for nearly instant tuning. It learns your favorite frequencies and bands as you use it. You can also start a tuning cycle manually whenever necessary.

YT100 front pic

YT100 back pic



•RF Power: 1 to 100 watts SSB and CW, 30W on PSK.
•Latching relays for ultra low power consumption
•Built-in CAT interface for FT-100(D), 857(D) and 897(D) radios. Powered from Yaesu radio over CAT port.
•CAT thru port for computer control of radio. 4800 baud.
•2000 memories sorted by frequency.
•1.8 to 54 MHz coverage (continuous coverage for MARS)
•Tunes 4 to 800 ohms. (16 to 150 on 6M)
•SO-239 in and out connections for dipoles, verticals, beams, G5RV, OCF, Cobra, ect.
•Dimensions: 7.0”L, 7.0”W, 2.0”H. Weight: 20 ounces
•Includes 1 foot CAT interface cable.


Link til manual.

Lest 502 ganger Sist redigert Mandag, 07 November 2016 10:26