Link til brosjyre.


Link til manual.


Link til app for Iphone.


Link til app for android.


Link til programerings software/updates.

Link til stort bilde.

Since the introduction of D-STAR in 2001, Icom has been committed to improving and advancing the D-STAR experience. The ID-4100A and it’s advance technology does just that! The upgraded user interface and new enhancements provide a product other digital voice modes cannot match!

Output power

  50W, 15W, 5W (Hi, Mid, Low)

RX frequencies:

  118-174, 230-550MHz

Receiver type:

  Dual conversion superhetrodyne

User friendly

The ID-4100A’s full dot-matrix display gives the user the ability to see a lot of information on the screen. For example, Repeater list or GPS position information are clearly arranged and easy to read.

GPS Position
Repeater List

Users can pick between white, green, amber or blue as the backlight color. The backlight night time setting function, allows you to automatically change the display backlight brightness when the designated time comes.

Green, Amber and Blue Radios

The DV/FM near repeater search function assists you in accessing nearby repeaters, even in areas you visit for the first time. The function searches for nearby repeaters using the repeater memories with the GPS position information. To use the near repeater search function, the position data of the repeater is required. The ID-4100A will ship with the D-STAR repeater memories preprogrammed, but the position data of some D-STAR repeaters may not be entered or exact.

Built-in GPS

The integrated GPS receiver shows your own position, course, speed and altitude on the display and can be used for exchanging position reports, D-PRS and searching for nearby repeaters.

Voice & data storage

Add a microSD* card to store various information including voice memory, TX voice message, QSO log, RX history log, and GPS log data. Memory channels and other settings can be saved and loaded into the transceiver.
* MicroSD card is sold separately.

Android™ and iOS™ apps available

Install the UT-137 Bluetooth® board and download the RS-MS1I (for iOS™ devices) or RS-MS1A (for Android™ devices) to enable you to wirelessly connect to the ID-4100A and remotely set the DR functions, link with a map application, and send/receive messages over the DV mode. In addition, pictures taken by a smart device can be transmitted via the DV Fast Data mode or DV mode.

Download from Google Play™ >   |   Download from Apple's App Store >

DR
Text Messaging
Send a photo
Map
Software/AppOSFunctionRequired option
RS-MS1A Android™ 4.0 or later Remote control operation UT-137
RS-MS1I iOS™ 8.0.1 or later Remote control operation UT-137
RS-MS3A Android™ 4.0 or later Terminal/Access Point mode OPC-2350LU
RS-MS3W Windows® 7 or later Terminal/Access Point mode OPC-2350LU
CS-4100 Windows® 7 or later Programming microSD card/OPC-2350LU/
OPC-1529R/OPC-478UL

Additional features

  • Data place in voice frames transfer data 3.5 times faster (3480 bps) than in the conventional DV mode (with voice).
  • Terminal mode and access point mode
  • The QUICK key allows instant access to menus listing dedicated functions depending on mode
  • Multiple scan functions for Memory/Bank scan, Full scan, Band scan, Program scan, Program link scan, Duplex scan Tone scan, and DR scan
  • 16 channels of DTMF memory (24-digit)
  • CTCSS/DTCS signaling with the split tone functions (analog mode)
  • 8.33 kHz air band channel reception
  • Auto repeater function

Tilbehør.

Bluetooth®

UT-137
Unit

UT-137 Bluetooth® Unit

VS-3
Headset

VS-3 Headset

Cables

OPC-440
Microphone extension cable (16.4ft)

OPC-440

OPC-589
Microphone adapter cable (8 pin to RJ-45)
OPC-589
OPC-599
Cable adapter converts 13-pin to 7/8-pin connectors

OPC-599

OPC-647
Microphone extension cable (8.2ft)

OPC-647

OPC-1529R
Data cable (RS232 to 3.5mm)

OPC-1529R

OPC-2350LU
USB cable connects Android™

OPC-2350LU

External speakers

SP-30

SP-30

SP-35

SP-35

Microphones

HM-154


HM-154

HM-207S


HM-207S

HM-209
Active noise canceling

HM-209

HM-232 


HM-232

Mounting hardware

MBF-4

MBF-4

Remote mounting

MBF-1
Mounting base

MB-F1

MBA-8
Controller bracket

MBA-8

OPC-1156:
11.4ft controller extension cable

OPC-1156